Fix Multiple DMARC Records or DMARC Record Not Found

Why two v=DMARC1 records at _dmarc make receivers ignore the policy, why a checker says no DMARC record found (wrong host name, doubled domain, bad v= tag), and how RFC 7489 and RFC 9989 handle each case.

Home › Guides › Multiple DMARC records / not found

Last updated 18 November 2026

Quick answer

Receivers look for exactly one TXT record starting with v=DMARC1 at _dmarc. plus the From domain, for example _dmarc.example.com.

The DMARC Record Checker reports both: it flags multiple DMARC records, and it shows where it looked when it finds none.

How receivers find the record

RFC 7489 section 6.6.3:

  1. Query TXT at _dmarc. + the RFC5322.From domain.
  2. Discard records that don't start with a v= tag naming the current version of DMARC.
  3. If none are left, query the Organizational Domain (for news.example.com, that is _dmarc.example.com).
  4. If the remaining set contains multiple records or no records, policy discovery terminates and DMARC processing is not applied to the message.

RFC 9989 obsoletes RFC 7489 and replaces step 3 with a DNS Tree Walk: if there is no valid record at the Author Domain, the receiver queries each parent name in turn, at most eight queries in total. At every step, records that don't start with the DMARC v tag are discarded, and "If multiple DMARC Policy Records are returned for a single target, they are all discarded."

What is publishedRFC 7489RFC 9989
Two v=DMARC1 records at _dmarc.example.com, mail From example.comDMARC not appliedBoth discarded; the walk continues to the parent name (_dmarc.com), so your own policy is not applied
Two records at _dmarc.news.example.com, one good record at _dmarc.example.com, mail From news.example.comDMARC not applied (the Organizational Domain is only queried when the first set is empty)The two are discarded and the example.com record applies, using its sp policy if set
No record at _dmarc.news.example.com, one at _dmarc.example.comThe example.com record applies to the subdomain. RFC 9989: the sp tag applies to existing subdomains, np to non-existent ones, otherwise p. Microsoft: subdomains inherit the parent's DMARC settings unless they publish their own record.
A v=DMARC1 record plus another TXT at _dmarc that doesn't start with v=DMARC1The other TXT is discarded, so only one DMARC record remains. Not a duplicate.
One record split into several quoted stringsOne record. RFC 9989: the strings MUST be concatenated in order and parsed as a single string.

Fix multiple DMARC records

  1. List what is published: dig +short TXT _dmarc.example.com, or Microsoft's Resolve-DnsName -Name "_dmarc.contoso.com" -Type TXT.
  2. Decide on one policy. If the records were added by different people or vendors, combine what each one needed: the strictest p= you are ready for, and every report address in a single comma-separated rua= list. Google's example is rua=mailto:postmaster@example.com, mailto:dmarc@example.com.
  3. Delete the other records. Microsoft's DMARC troubleshooting table lists "ensure only one _dmarc TXT record exists" as a fix for dmarc=temperror or dmarc=permerror.
  4. If a report vendor is outside your domain, it publishes its own authorization record (Microsoft's example: contoso.com._report._dmarc at the vendor's domain). That is a different name, not a second DMARC record for you.

Fix DMARC record not found

The record is on the wrong name

DMARC is never read from the root domain's TXT records. RFC 9989 says the record is published at the name created by prepending the label _dmarc to the domain. A v=DMARC1 TXT at example.com itself is ignored. Google's setup steps give the host as _dmarc.example.com.

The host name got doubled

In a zone file, a name that doesn't end in a dot is relative and gets the zone origin appended (RFC 1035 section 5.1). DNS control panels that treat the host field as relative turn _dmarc.example.com into _dmarc.example.com.example.com. Query that doubled name with DNS Lookup; if the record is there, change the host to just _dmarc.

The v= tag is wrong

RFC 9989: v MUST be the first tag, its value is case sensitive, and the only possible value is DMARC1. If the tag isn't first, is missing, or isn't DMARC1, the entire record MUST be ignored. So p=none; v=DMARC1 or v=dmarc1 counts as no record at all.

The p= tag is missing or invalid

This isn't "not found", but it has a similar effect. Both RFCs say that if the record has no valid p tag (or an invalid sp, or in RFC 9989 np), the receiver treats it as p=none when there is a syntactically valid rua, and otherwise applies no DMARC processing.

What headers show

RFC 7489 defines dmarc=none as: no DMARC policy record was published for the aligned identifier, or no aligned identifier could be extracted. Microsoft 365 also shows dmarc=bestguesspass when no DMARC record is published for the From domain; Microsoft's advice is to publish an explicit DMARC record.

Verify

  1. dig +short TXT _dmarc.example.com returns exactly one answer and it starts with v=DMARC1. Check public resolvers with the DNS Propagation Checker.
  2. The DMARC Record Checker shows one record with a valid p= and no errors.
  3. Send a test message and read the headers in the Email Header Analyzer: dmarc=pass, not none or bestguesspass.
  4. Then plan enforcement with the p=none to p=reject rollout.

Audit hundreds of domains at once

Need SPF, DMARC and MX checks across a whole client list? Run the Bulk SPF / DMARC / MX Auditor on Apify ($2 per 1,000 domains).

Related tools and guides

Check the record with the DMARC Record Checker, build a new one with the DMARC Record Generator, read aggregate reports in the DMARC Report Analyzer, query any TXT name with DNS Lookup, and check SPF, DKIM and DMARC together with the Email Deliverability Checker. Related guides: DMARC for Microsoft 365, p=none to p=reject rollout, DMARC fail with SPF pass, SPF multiple records and SPF, DKIM and DMARC for Google Workspace.

FAQ

Can a domain have two DMARC records?

No. Under RFC 7489, more than one DMARC record at the same _dmarc name means DMARC processing is not applied. Under RFC 9989 the duplicates are all discarded and the receiver keeps walking up the DNS tree. Keep exactly one record.

Why does my checker say no DMARC record found?

Common causes: the record was added to the root domain instead of _dmarc.example.com, the DNS panel appended the domain twice (_dmarc.example.com.example.com), or the record does not start with v=DMARC1. Query _dmarc.yourdomain with a TXT lookup to see what is actually published.

Where exactly does the DMARC record go?

A single TXT record at _dmarc followed by your domain, for example _dmarc.example.com, with a value starting v=DMARC1; p=. Subdomains without their own record use the parent domain record.

How do I send DMARC reports to two vendors?

Use one record with both addresses in a single comma-separated rua tag, for example rua=mailto:a@example.com, mailto:b@example.net. Do not publish a second DMARC record for the second vendor.

What does dmarc=bestguesspass mean in Microsoft 365?

Microsoft shows it when no DMARC record is published for the From domain and it infers a pass. It is not a real DMARC result; publish an explicit DMARC record.

Want the full kit?

Runbooks, checklists and helpdesk templates: IT Admin Packs on Gumroad.